Hệ thống sản xuất Oxy

On site oxygen production up to 99,5% purity
 Novair introduces a PSA oxygen generator capable to produce high purity oxygen on site, with an exceptional stability. Oxypure is an ideal alternative to traditional gas supply (cylinders or liquefied gas). Our large range of capacities and various output oxygen purities allow us to respond to the needs of all types of industries, with the most cost effective solutions.

Main features & benefits
•    Turnkey solution
•    Fully automatic process
•    Various flow rates and purities available
•    Highly competitive production cost
•    Remote monitoring & alarm functions
Designed for
•    Fish farming
•    Glass manufacturing
•    Flame / laser cutting
•    Waste water treatment
•    Winery
•    etc...

Optimised PSA technology
Oxypure oxygen generators by Novair Industries are based on the Pressure Swing Adsorption (PSA) process. This technology is a static separation of air gases through a specific molecular sieve capable to adsorb nitrogen under pressure. Novair R&D has optimized the process to obtain a high and stable oxygen purity – up to 99%, at a very competitive cost.

Designed for a simple and quick installation, they include:
•    2 PSA sieve beds
•    1 monitoring system CPU Controller with digitalscreen
•    1 separate oxygen receiver equipped for oxygen service

High efficiency
For a long lasting performance and an easy & limited
maintenance, Oxypure generators feature :
•    Ergonomic design
•    High efficiency molecular sieve
•    Low energy consumption
•    Reliable, tested and controlled components

Additional features & available options
•    Air compressor
•    Air Dryer
•    Air tank
•    Containerized or skid mounted plant
•    Cylinder filling system
•    Gas booster
•    Gas analyzers
•    Flowmeter
•    Remote monitoring

Automatic monitoring
Oxypure oxygen generators are automatically managed by the CPU controller, a device based on a PLC system comprising a logic controller, a digital screen and an ergonomic control panel. Key informations such as oxygen concentration, hour meter or alarm reports are displayed on the CPU screen. This user-friendly system is available in several languages.

Inlet & environmental parameters

Plant room requirements

1/ Dedicated room:
The plant room provided should be exclusively dedicated to the oxygen production unit. It shall contain no storage or warehousing of any product whatsoever. In particular, the presence of flammable materials is strictly prohibited.
• Minimum dimensions: according to the layout plan approved by NOVAIR (see below).
• Ground: concrete slab to level.
• Overload: the slab bear the weight of the equipment installed. Please refer to product datasheet.
• Coating: smooth screed with floor paint or hard coating quartz type.
2/ Evacuation of condensate:
A connection point for the evacuation of condensed water has to be provided in the room.
3/ Ventilation:
Provide a fresh air grid – minimum 0.10 m2 per Kw and a hot air extraction ventilator at the top of the room.
Warm air compressor should be vented outside through ducts. Avoid installing the evacuation of hot air at the same side as the
entry of cold air.
The room temperature must be above +5 °C and below the maximum temperature in the defined specification (30 °C standards).
If necessary, appropriate means (heating, air conditioning) should be installed to achieve these temperature.In case of room temperature exceeding 30°C, compressed air production should be designed in consequence.

4/ Electrical cabinet :
Power supply cabinet must be installed on premises.
Details of requested power features will be provided by NOVAIR for each facility.
It must include a ground line in accordance with the regulations in force.
5/ Lighting:
The room should be well lit, especially around compressor(s)and generator(s).
6/ Fire safety :
Security measures must be taken and displayed at the entrance of the premises:
- Smoking ban
- Open fire ban
- Sprinklers installation

Example of layout plan

—————————————————————–

MỌI THÔNG TIN CHI TIẾT LIÊN HỆ

CÔNG TY CỔ PHẦN GIẢI PHÁP TỰ ĐỘNG HÓA ETEK

Địa chỉ trụ sở chính 189 Phan Trọng Tuệ –Thanh Liệt- Thanh Trì – Hà Nội

Hotline: (+84) 965.800.166

Hoặc để lại thông tin tại Boxchat

Website: etek.com.vn​

Các vị trí Tuyển dụng hấp dẫn từ ETEK