3D Print Heads

3D models and shapes can be realized at varying speeds. And this with different layer thicknesses. We guarantee a structure-protecting additive application and can handle high viscosities. As a result, 3D print heads with previously unused materials open up completely new design possibilities.

Industrial 3D printing with ViscoTec print heads

Precise, clean, automatic and repeatable: For precise material handling.

• Gentle product conveyance of the material
• Volumetric dosing
• Precise start and end points
• Programmable suck-back function
• Printing regardless of viscosity

1-component print head

• Theoretical volumetric flow: 0.03 – 6.0 ml/min
• Weight: about 750 g
• Dosing materials: UV adhesives, epoxy resins, acrylate, silicone, grease, inks, waxes, ceramics, bio-technical suspensions, abrasive pastes and others
•  

2-component print head

• Theoretical volumetric flow: 0.03 – 6.00 ml/min per mixing head part
• Mixing ratio: 1:1 to 5:1 (depending on dosing material, viscosity, pre-pressure and mixing ratio)
• Weight: about 1,100 g
• Printing materials: Epoxy resins, acrylate, silicone, polyurethane, polyester resins and others

—————————————————————–

MỌI THÔNG TIN CHI TIẾT LIÊN HỆ

CÔNG TY CỔ PHẦN GIẢI PHÁP TỰ ĐỘNG HÓA ETEK

Địa chỉ trụ sở chính 189 Phan Trọng Tuệ –Thanh Liệt- Thanh Trì – Hà Nội

Hotline: (+84) 965.800.166

Hoặc để lại thông tin tại Boxchat

Website: etek.com.vn​

Các vị trí Tuyển dụng hấp dẫn từ ETEK